VESC2X3Bridge Documentation
Welcome! This is the main index for the VESC2X3Bridge documentation.
Getting Started
If you're new, start here:
All Guides
Getting started
The VESC2X3Bridge is a small computer that sits between your scooter's motor controller (VESC) and its Ninebot dashboard. Without it, the dashboard and the motor controller don't understand each other — the bridge acts as a translator so they can work together.
Compatibility and Features
Scooter compatibility
How to order the VESC2X3Bridge
Requirements
How to install the VESC2X3Bridge
Materials needed
Configuring the VESC2X3Bridge
Settings are changed through the web interface at http://192.168.5.1. To reach it, the bridge must be in Config Mode.
Updating the Firmware
Firmware updates are delivered over Wi-Fi directly through the device web interface. No cables or apps are needed.
Configuring the VESC
There are two types of Lisp scripts provided by me.
How to coat your PCB
Materials used
VESC2X3Bridge Troubleshooting
Troubleshooting Flowchart