Getting started
The VESC2X3Bridge is a small computer that sits between your scooter's motor controller (VESC) and its Ninebot dashboard. Without it, the dashboard and the motor controller don't understand each other — the bridge acts as a translator so they can work together.
Components
The VESC2X3Bridge consists of two components:
- Base VESC2X3Bridge — the main bridge board
- LightBoard — controls the lights on your scooter
Board Schematics
The KiCAD PCB files for the VESC2X3Bridge are available in the repository:
Following this guide
Use the Next button at the bottom of each page to work through the setup steps in order. Start with checking compatibility on the next page.